More and more motorists are trying to maintain their vehicles by themselves. This results in considerable savings because contemporary cars necessitate more and more maintenance and are made up of more and more technical parts that lead to new breakdowns or inconveniences. One of the problems that disturbs more and more Nissan Rogue owners is a clogged air flow meter, which will result in a loss of power and black exhaust fumes. Today we are going to check out how to clean the mass air flow sensor of your Nissan Rogue? . First, we will describe how your mass airflow sensor works and its usefulness, second, why it might be relevant to clean this sensor , and finally, how to clean the mass air flow sensor of a Nissan Rogue .

clean-mass-airflow-sensor-nissan-rogue

Utility and action of the mass air flow meter of a Nissan Rogue

.
So we start our content with the procedure and aim of your Nissan Rogue flowmeter.

The intent of the mass air flow sensor on Nissan Rogue

The mass air flow sensor is a part that has been created actually quite not too long ago and mainly supplied on diesel models. In actual fact, with injection engines, the fuel and air intake has become very precise and it is therefore essential for the ECU to know the exact volume of air added into the engine to modify the behaviour of complementary intake parts such as the injection or the EGR valve, if you have problems with the EGR valve on your Nissan Rogue, do not think twice to consult our content on this subject.

Mass air flow sensor operation on Nissan Rogue

Now, we are going to have a look at how it works, before trying to clean the mass air flow sensor of your Nissan Rogue , you must already find out how it works to achieve this maintenance action properly.

The mass air flow sensor is consequently mainly there to collect data on the air intake of your motor vehicle. To get this done, it must be mounted just after the air intake of your Nissan Rogue, i. e. just after the air filter. It is a pipe supplied with a sensor that will analyze the air in the intake and transmit the data to the ECU of your car.

Why clean the mass air flow sensor of a Nissan Rogue?

The mass air flow sensor of your Nissan Rogue can have problems and this is what we will try to see and understand what problems you might be facing!

Mass air flow sensor problems Nissan Rogue

Here are the different problems that the air flow sensor of your Nissan Rogue can trigger:

  • higher fuel consumption: Because a dirty flow meter will actually lead to higher fuel consumption caused by poor air flow…
  • Power loss: Associated with similar problem, this lack of air can trigger a loss of power to your engine.
  • Difficulties starting the car: Finally, one of the last traditional problems connected to a dirty flowmeter will be that your Nissan Rogue will have more issues to start the vehicle.

How do I clean the mass air flow sensor from a Nissan Rogue?

After examining the operation and complications that the flowmeter can trigger, we will look at how to resolve these problems by explaining to you how to clean the mass air flow sensor of your Nissan Rogue . You should know that this procedure is actually quite simple to accomplish and you will not need advanced mechanical skills to do it yourself, a good technique to avoid a trip to the garage area and a steep bill. See down below the different steps to stick to to accomplish this maintenance act:

  • After having based the mass air flow sensor of your Nissan Rogue , you will have to dismantle it. To get this done, action delicately, but you will just have to disassemble it on both sides of the air duct and detach the electrical plug on top of it.
  • Once taken apart, you will be able to continue to the step cleaning the mass air flow sensor of your Nissan Rogue . This sensor will, with time, get dirty and its two “filaments” that will give information to your computer on the quality and temperature of the air will no longer be able to collect data properly, it is in this sense that it will affect the operation of the engine of your Nissan Rogue. The intent of this cleaning will be to take out all its impurities to allow it to work efficiently again.
  • Let soak the lower part of your mass air flow sensor (not the plug part) in acetone or another solvent for a few minutes , which will take out most of the grime
  • .

  • Now we’ll move on to the very delicate cleaning of the flow meter filaments. You have to be very watchful, in any other case your mass air flow sensor will be permanently broken. With the help of a fine brush and solvent, delicately clean the two filaments of your mass air flow sensor . If you are too afraid of damaging it, you can also clean them with a brake fluid in the form of an aerosol by spraying the jet on these filaments.

Now you know how to clean the mass air flow sensor of your Nissan Rogue , you should feel a noticeable difference in the behavior of your engine.

If you wish more tutorials on the Nissan Rogue, go to our Nissan Rogue category.