More and more drivers are trying to maintain their cars by themselves. This results in significant cost savings because contemporary cars involve more and more routine service and are done up of more and more technical parts that result in new breakdowns or inconveniences. One of the problems that affects more and more Ds Ds 5 owners is a clogged air flow meter, which will bring about a loss of power and black exhaust gases. In this article we are going to examine how to clean the mass air flow sensor of your Ds Ds 5? . First, we will explain how your mass airflow sensor works and its value, second, why it might be relevant to clean this sensor , and at last, how to clean the mass air flow sensor of a Ds Ds 5 .
Utility and operation of the mass air flow meter of a Ds Ds 5
.
So we begin our article with the procedure and goal of your Ds Ds 5 flowmeter.
The purpose of the mass air flow sensor on Ds Ds 5
The mass air flow sensor is a component that has been developed actually quite not long ago and mainly equipped on diesel models. Obviously, with injection engines, the fuel and air intake has become very precise and it is consequently necessary for the ECU to know the exact volume of air loaded into the engine to adapt the actions of complementary intake parts such as the injection or the EGR valve, if you have problems with the EGR valve on your Ds Ds 5, do not think twice to consult our article on this subject.
Mass air flow sensor operation on Ds Ds 5
Now, we are going to examine how it works, before trying to clean the mass air flow sensor of your Ds Ds 5 , you must already understand how it works to do this routine service action properly.
The mass air flow sensor is consequently mainly there to collect info on the air intake of your car. To do this, it must be fitted just after the air intake of your Ds Ds 5, i. e. just after the air filter. It is a pipe equipped with a sensor that will review the air in the intake and transfer the info to the ECU of your car.
Why clean the mass air flow sensor of a Ds Ds 5?
The mass air flow sensor of your Ds Ds 5 can have problems and this is what we will try to discover and understand what problems you might be struggling with!
Mass air flow sensor problems Ds Ds 5
Here are the different problems that the air flow sensor of your Ds Ds 5 can provoke:
- higher fuel consumption: Because a dirty flow meter will necessarily bring about more significant fuel consumption caused by poor air flow…
- Power loss: Associated with similar problem, this lack of air can provoke a loss of power to your engine.
- Difficulties starting the vehicle: Finally, one of the last classic problems connected with a dirty flowmeter will be that your Ds Ds 5 will have more troubles to begin the car.
How do I clean the mass air flow sensor from a Ds Ds 5?
After looking at the operation and concerns that the flowmeter can provoke, we will look at how to solve these problems by explaining to you how to clean the mass air flow sensor of your Ds Ds 5 . You should know that this operation is actually quite simple to carry out and you will not need advanced mechanical abilities to do it yourself, a good technique to avoid a trip to the workshop and a steep bill. See below the different steps to stick to to carry out this routine service act:
- After having based the mass air flow sensor of your Ds Ds 5 , you will have to dismantle it. To do this, action gently, but you will just have to disassemble it on both sides of the air duct and detach the electrical plug on top of it.
- Once taken apart, you will be able to proceed to the step cleaning the mass air flow sensor of your Ds Ds 5 . This sensor will, over time, get dirty and its two “filaments” that will give information to your computer on the quality and temperature of the air will no longer be able to collect data properly, it is in this sense that it will disturb the operation of the engine of your Ds Ds 5. The purpose of this cleaning will be to remove all its impurities to enable it to work efficiently again.
- Let soak the lower section of your mass air flow sensor (not the plug part) in acetone or another solvent for a few minutes , which will remove most of the grime
- Now we’ll proceed to the very delicate cleaning of the flow meter filaments. You have to be very cautious, otherwise your mass air flow sensor will be permanently damaged. With the help of a fine brush and solvent, gently clean the two filaments of your mass air flow sensor . If you are too afraid of destroying it, you can also clean them with a brake fluid in the form of an aerosol by spraying the jet on these filaments.
.
Now you know how to clean the mass air flow sensor of your Ds Ds 5 , you should feel a noticeable difference in the behavior of your engine.
In the event that you have any further questions about the Ds Ds 5, do not hesitate to consult our Ds Ds 5 category.
