The lighting elements of our vehicles are part of the important components of security. Obviously, they enable us to see and be seen at night or in bad climate conditions. It is consequently important to keep them in good functioning order and to constantly have optimal lighting. In this post, we are going to concentrate on the headlights of your motor vehicle and more exactly how to clean the headlights of your Jeep Wrangler? We will start this content page with the reason why it can be important to clean the headlights of your car, then, how to concretely clean the headlights of your Jeep Wrangler.

clean-headlights-jeep-wrangler

Why clean the headlights covers of your Jeep Wrangler?

The majority of us usually tend to take into consideration emptying the vehicle, changing a burnt-out bulb, but, we rarely take into consideration checking the cleanliness of the headlights on his Jeep Wrangler . Obviously, whether they are yellow, opaque, or dirty , it is necessary to check that your headlights are capable to properly illuminate the road. First of all, you can check the headlight adjustment of your Jeep Wrangler, or its low beams, by having a look at our two specific content articles.

Clean the dull headlights of your Jeep Wrangler for roadworthiness testing

The first explanation you may be on this article is that you wanted or passed the technical inspection and there are complications with the headlights of your Jeep Wrangler. Obviously, if your headlights have become opaque after some time and you have lost lighting power, you may not complete the technical inspection, in this case it may therefore be important to clean or restore the headlights plastic cover of your Jeep Wrangler before the technical inspection or the counter inspection.

Clean the opaque headlights of its Jeep Wrangler to gain visibility

Second situation, you simply have the impression of lighting less well at night with your Jeep Wrangler . In this case, it is interesting to clean them before the layer of dirt turned out to be tricky to remove, we suggest you to clean the headlights of your motor vehicle regularly .

How to clean the headlights of its Jeep Wrangler?

We’ll now proceed to the component that you’re probably most interested in, how to clean the headlights covers of your Jeep Wrangler? We’ll first look at how to clean the inside of your car’s headlights, then the outside, and finally how to refurbish the headlights of your Jeep Wrangler.

Clean the inside of the headlights of your Jeep Wrangler

First possibility, you have the feeling that there is humidity inside your headlights or dirt . In this case, you’ll have to clean the inside of your Jeep Wrangler headlights, for that, nothing could be much easier:

  • Pop the hood of your car
  • Dismantle the optical parts using the screws supplied for this aim
  • Take out the outer headlight cover and clean the inside with a damp sponge and baking soda sprinkled on the inside of the cover
  • Blow dry it at the strong dryer before you reassemble it

Clean the plastic covers of the headlights on its Jeep Wrangler

Second possibility, the optics of the headlights of your Jeep Wrangler are dirty and you want to clean them, some choices are available to you, here they are:

  • Clean the headlights of your motor vehicle with a damp sponge sprinkled with a tablespoon of baking soda and then rinse
  • Clean the headlights of your Jeep Wrangler with a cloth and toothpaste . Spread toothpaste over the entire surface of your headlights and rub with a cloth in a circular motion, then rinse with plenty of water
  • Clean the headlights of your car with a cleaning kit located in a specialized shop. You will only have to follow the instructions for cleaning your headlights. This treatment is effective but a little more pricey than the other methods shown earlier.

Polishing the faded headlights of its Jeep Wrangler

At last, in case even after cleaning your headlights, you have the feeling that they remain dull or faded , we have a solution for you. This is frequently the case for a counter-visit of the technical control. Here is how to refurbish the headlights of your Jeep Wrangler/Strong:

  • Clean your headlights briefly with a sponge and baking soda
  • Protect your body with thick tape around your headlights
  • Get some 400 grit sandpaper, moisten it, and make gentle circular moves to sand the surface of your headlight, finish with horizontal motions
  • Replicate the treatment with 600 grit sandpaper after rinsing the headlight
  • Finally, achieve this one last time with glass paper 2000 grain then rinse your headlights
  • Finally, apply a protective wax to protect the headlights of your Jeep Wrangler

If you have any additional questions about the Jeep Wrangler, do not hesitate to consult our Jeep Wrangler category.