Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Volkswagen Polo 3 is one of the great classics. Even though this action is very easy to do, some of you are likely concerned about why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Volkswagen Polo 3? We will now answer these questions.
Benefit to always have the brake fluid level up in your Volkswagen Polo 3
So we start our article with the significance of checking the brake fluid level on a Volkswagen Polo 3. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is as a result important to examine the brake fluid level of your Volkswagen Polo 3 often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its properties. This operation is really simple and does not require amazing expertise of mechanics, so it is easy for all Volkswagen Polo 3 owners to do it themselves. If the Brake light on the dashboard of your Volkswagen Polo 3 does not match to a lack of brake fluid, do not be reluctant to consult our article for details. On the other hand, there are some precautions and rules to respect that we will see in the next part of this article.
How to fill up the brake fluid of a Volkswagen Polo 3
So now we will describe to you how to do the brake fluid level on a Volkswagen Polo 3. Please be aware that this is very elementary to do. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Volkswagen Polo 3. Now here are the steps to follow to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to find, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
- Once uncovered, read the instructions on the cap mindfully so as not to make any mistakes within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Volkswagen Polo 3 up to the mark “Max”.
- If the level was below the “Min” mark before you checked the brake fluid level in your Volkswagen Polo 3, make sure you examine the level in a few days/weeks to be certain you don’t have a leak in the brake system
.
That’s it, you now have all the information you need to safely fill the brake fluid level of your Volkswagen Polo 3.
If perhaps you have any additional questions about the Volkswagen Polo 3, do not hesitate to consult our Volkswagen Polo 3 category.
