Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Volkswagen New Beetle is one of the great classics. Even though this action is basic to do, some of you are likely attempting to find why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Volkswagen New Beetle? We will now answer these questions.


Benefit to always have the brake fluid level up in your Volkswagen New Beetle

So we begin our content with the significance of verifying the brake fluid level on a Volkswagen New Beetle. This fluid has an essential function on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is therefore fundamental to verify the brake fluid level of your Volkswagen New Beetle frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because as time passes the brake fluid loses its properties. This process is extremely simple and does not require evolved experience of mechanics, so it is easy for all Volkswagen New Beetle owners to do it on their own. If the Brake light on the dashboard of your Volkswagen New Beetle does not correspond to a lack of brake fluid, do not be reluctant to consult our content for details. On the other hand, there are some measures and rules to respect that we will check out in the up coming section of this content.

How to fill up the brake fluid of a Volkswagen New Beetle

So now we will describe to you how to do the brake fluid level on a Volkswagen New Beetle. Please notice that this is very elementary to perform. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Volkswagen New Beetle. Now here are the steps to stick to to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to identify, it is usually made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once located, read the instructions on the cap cautiously so as not to make any mistakes within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Volkswagen New Beetle up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Volkswagen New Beetle, make sure verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

That’s it, you now have all the info you need to securely fill the brake fluid level of your Volkswagen New Beetle.

If perhaps you have any further questions about the Volkswagen New Beetle, do not hesitate to consult our Volkswagen New Beetle category.