Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Volkswagen Golf 3 is one of the great classics. Although this act is elementary to carry out, some of you are most probably wondering why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Volkswagen Golf 3? We will now answer these questions.

check-brake-fluid-level-volkswagen-golf-3

Benefit to always have the brake fluid level up in your Volkswagen Golf 3

So we begin our guideline with the benefit of checking the brake fluid level on a Volkswagen Golf 3. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is consequently very important to check the brake fluid level of your Volkswagen Golf 3 regularly (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid will lose its properties. This procedure is specially simple and does not require amazing knowledge of mechanics, so it is easy for all Volkswagen Golf 3 owners to do it on their own. If the Brake light on the dashboard of your Volkswagen Golf 3 does not correspond to a lack of brake fluid, do not hesitate to have a look at our guideline for details. On the other hand, there are some measures and rules to respect that we will notice in the following part of this guideline.

How to fill up the brake fluid of a Volkswagen Golf 3

So now we will show to you how to do the brake fluid level on a Volkswagen Golf 3. Please take note that this is very elementary to complete. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this information in the user manual of your Volkswagen Golf 3. Now here are the steps to adhere to to make your level:

  • Open your cover and situate your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
  • Once discovered, browse the instructions on the cap carefully so as not to make any mistakes within the the procedure, we suggest you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Volkswagen Golf 3 up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Volkswagen Golf 3, remember to check the level in a few days/weeks to ensure that you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to securely fill the brake fluid level of your Volkswagen Golf 3.

If you have any additional questions about the Volkswagen Golf 3, do not hesitate to consult our Volkswagen Golf 3 category.