Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Vauxkhall Moka is one of the most classics. Nevertheless this act is very easy to execute, some of you are almost certainly concerned about why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Vauxkhall Moka? We will now answer these questions.


Benefit to always have the brake fluid level up in your Vauxkhall Moka

So we commence our guideline with the significance of looking at the brake fluid level on a Vauxkhall Moka. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is consequently necessary to check the brake fluid level of your Vauxkhall Moka on a regular basis (every 10,000km for example). It is also beneficial to flush the system every 50,000km because over time the brake fluid will lose its properties. This process is extremely simple and does not require advanced experience of mechanics, so it is easy for all Vauxkhall Moka owners to do it themselves. If the Brake light on the dashboard of your Vauxkhall Moka does not correspond to a lack of brake fluid, do not think twice to read our guideline for details. Nevertheless, there are some precautions and rules to respect that we will see in the next section of this guideline.

How to fill up the brake fluid of a Vauxkhall Moka

So now we will learn to you how to do the brake fluid level on a Vauxkhall Moka. Please notice that this is very basic to complete. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Vauxkhall Moka. Now here are the steps to follow to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, read the instructions on the cap attentively so as not to make any mistakes within the the process, we recommend you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Vauxkhall Moka up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Vauxkhall Moka, remember to check the level in a few days/weeks to be sure you don’t have a leak in the brake system

That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Vauxkhall Moka.

If you have any additional questions about the Vauxkhall Moka, do not hesitate to consult our Vauxkhall Moka category.