Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Toyota Matrix is one of the most classics. Even though this action is elementary to do, some of you are likely wanting to know why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Toyota Matrix? We will now answer these questions.


Benefit to always have the brake fluid level up in your Toyota Matrix

So we start our guideline with the interest of verifying the brake fluid level on a Toyota Matrix. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is consequently necessary to examine the brake fluid level of your Toyota Matrix regularly (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This process is really simple and does not require amazing experience of mechanics, so it is easy for all Toyota Matrix owners to do it themselves. If the Brake light on the dashboard of your Toyota Matrix does not correspond to a lack of brake fluid, do not hesitate to seek advice from our guideline for details. Nevertheless, there are some precautions and rules to follow that we will notice in the following section of this guideline.

How to fill up the brake fluid of a Toyota Matrix

So now we will describe to you how to do the brake fluid level on a Toyota Matrix. Please note that this is very simple to accomplish. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Toyota Matrix. Now here are the steps to follow to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to find, it is in general made of whitish/transparent plastic, it is based over the master cylinder (metal part) and has a yellow cap.
  • Once identified, read the instructions on the cap attentively so as not to make any problems within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Toyota Matrix up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Toyota Matrix, make sure examine the level in a few days/weeks to make sure you don’t have a leak in the brake system

That’s it, you now have all the data you need to properly fill the brake fluid level of your Toyota Matrix.

If you want more tutorials on the Toyota Matrix, go to our Toyota Matrix category.