Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Toyota Highlander is one of the most classics. Although this process is simple to do, some of you are almost certainly wanting to know why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Toyota Highlander? We will now answer these questions.


Benefit to always have the brake fluid level up in your Toyota Highlander

So we begin our content page with the benefit of looking at the brake fluid level on a Toyota Highlander. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is as a result important to check the brake fluid level of your Toyota Highlander often (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid loses its attributes. This procedure is particularly simple and does not require amazing knowledge of mechanics, so it is easy for all Toyota Highlander owners to do it themselves. If the Brake light on the dashboard of your Toyota Highlander does not match to a lack of brake fluid, do not be reluctant to seek advice from our content page for details. Nevertheless, there are some precautions and rules to respect that we will notice in the up coming part of this content page.

How to fill up the brake fluid of a Toyota Highlander

So now we will learn to you how to do the brake fluid level on a Toyota Highlander. Please note that this is very elementary to do. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Toyota Highlander. Now here are the steps to follow to make your level:

  • Open your hood and situate your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
  • Once established, read the instructions on the cap attentively so as not to make any mistakes during the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Toyota Highlander up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Toyota Highlander, make sure check the level in a few days/weeks to ensure that you don’t have a leak in the brake system

That’s it, you now have all the information you need to securely fill the brake fluid level of your Toyota Highlander.

If you wish more tutorials on the Toyota Highlander, go to our Toyota Highlander category.