Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Toyota Corolla is one of the great classics. Even though this action is simple to accomplish, some of you are most likely trying to figure out why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Toyota Corolla? We will now answer these questions.


Benefit to always have the brake fluid level up in your Toyota Corolla

So we begin our content page with the significance of verifying the brake fluid level on a Toyota Corolla. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is as a result very important to verify the brake fluid level of your Toyota Corolla often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid loses its features. This operation is particularly simple and does not require advanced experience of mechanics, so it is easy for all Toyota Corolla owners to do it themselves. If the Brake light on the dashboard of your Toyota Corolla does not correspond to a lack of brake fluid, do not hesitate to have a look at our content page for details. However, there are some safety measures and rules to follow that we will notice in the next section of this content page.

How to fill up the brake fluid of a Toyota Corolla

So now we will show to you how to do the brake fluid level on a Toyota Corolla. Please note that this is very basic to do. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Toyota Corolla. Now here are the steps to follow to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to find, it is usually made of whitish/transparent plastic, it is based over the master cylinder (metal part) and has a yellow cap.
  • Once found, read the instructions on the cap carefully so as not to make any mistakes within the the operation, we suggest you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Toyota Corolla up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Toyota Corolla, make sure you verify the level in a few days/weeks to make certain you don’t have a leak in the brake system

That’s it, you now have all the information you need to safely fill the brake fluid level of your Toyota Corolla.

To discover more tips on the Toyota Corolla, take a look at the Toyota Corolla category.