Among the small service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Toyota Corolla Verso is one of the most classics. Even though this process is very easy to do, some of you are most probably attempting to find why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Toyota Corolla Verso? We will now answer these questions.

check-brake-fluid-level-toyota-corolla-verso

Advantage to always have the brake fluid level up in your Toyota Corolla Verso

So we begin our guideline with the significance of looking at the brake fluid level on a Toyota Corolla Verso. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is consequently necessary to verify the brake fluid level of your Toyota Corolla Verso on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This process is extremely simple and does not require advanced knowledge of mechanics, so it is easy for all Toyota Corolla Verso owners to do it themselves. If the Brake light on the dashboard of your Toyota Corolla Verso does not correspond to a lack of brake fluid, do not think twice to consult our guideline for details. Nevertheless, there are some measures and rules to respect that we will notice in the up coming part of this guideline.

How to fill up the brake fluid of a Toyota Corolla Verso

So now we will explain to you how to do the brake fluid level on a Toyota Corolla Verso. Please notice that this is very basic to accomplish. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Toyota Corolla Verso. Now here are the steps to adhere to to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once established, browse the instructions on the cap mindfully so as not to make any problems within the the process, we suggest you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Toyota Corolla Verso up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Toyota Corolla Verso, make sure to verify the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Toyota Corolla Verso.

If you have any further questions about the Toyota Corolla Verso, do not hesitate to consult our Toyota Corolla Verso category.