Among the small service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Toyota Aygo 2 is one of the most classics. Nevertheless this act is basic to accomplish, some of you are likely trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Toyota Aygo 2? We will now answer these questions.
Benefit to always have the brake fluid level up in your Toyota Aygo 2
So we start our content page with the significance of checking the brake fluid level on a Toyota Aygo 2. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is consequently essential to verify the brake fluid level of your Toyota Aygo 2 often (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid will lose its features. This procedure is really simple and does not require evolved knowledge of mechanics, so it is easy for all Toyota Aygo 2 owners to do it on their own. If the Brake light on the dashboard of your Toyota Aygo 2 does not match to a lack of brake fluid, do not think twice to browse our content page for details. On the other hand, there are some measures and rules to follow that we will notice in the following part of this content page.
How to fill up the brake fluid of a Toyota Aygo 2
So now we will explain to you how to do the brake fluid level on a Toyota Aygo 2. Please note that this is very simple to do. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this information in the user manual of your Toyota Aygo 2. Now here are the steps to follow to make your level:
- Open your bonnet and locate your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
- Once identified, browse the instructions on the cap cautiously so as not to make any problems during the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Toyota Aygo 2 up to the mark “Max”.
- If the level was under the “Min” mark before you examined the brake fluid level in your Toyota Aygo 2, make sure verify the level in a few days/weeks to make sure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Toyota Aygo 2.
To get more tips on the Toyota Aygo 2, take a look at the Toyota Aygo 2 category.
