Among the small maintenance acts that you should do regularly on your car, to fill up the brake fluid level of your Toyota 86 is one of the great classics. Although this action is very easy to perform, some of you are probably attempting to find why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Toyota 86? We will now answer these questions.


Advantage to always have the brake fluid level up in your Toyota 86

So we start our content with the interest of checking the brake fluid level on a Toyota 86. This fluid has a crucial function on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is therefore very important to examine the brake fluid level of your Toyota 86 often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid will lose its properties. This process is really simple and does not require evolved experience of mechanics, so it is easy for all Toyota 86 owners to do it on their own. If the Brake light on the dashboard of your Toyota 86 does not correspond to a lack of brake fluid, do not hesitate to seek advice from our content for details. Nevertheless, there are some measures and rules to follow that we will check out in the next section of this content.

How to fill up the brake fluid of a Toyota 86

So now we will learn to you how to do the brake fluid level on a Toyota 86. Please take note that this is very basic to do. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this data in the user manual of your Toyota 86. Now here are the steps to follow to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to situate, it is in most cases made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
  • Once located, browse the instructions on the cap cautiously so as not to make any mistakes during the process, we advise you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Toyota 86 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you checked the brake fluid level in your Toyota 86, be sure to examine the level in a few days/weeks to make sure you don’t have a leak in the brake system

That’s it, you now have all the information you need to properly fill the brake fluid level of your Toyota 86.

If you need more guides on the Toyota 86, go to our Toyota 86 category.