Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Subaru Outback is one of the most classics. Although this work is elementary to accomplish, some of you are most likely wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Subaru Outback? We will now answer these questions.
Benefit to always have the brake fluid level up in your Subaru Outback
So we commence our guideline with the interest of looking at the brake fluid level on a Subaru Outback. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is as a result imperative to check the brake fluid level of your Subaru Outback on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid will lose its properties. This operation is extremely simple and does not require advanced expertise of mechanics, so it is easy for all Subaru Outback owners to do it on their own. If the Brake light on the dashboard of your Subaru Outback does not match to a lack of brake fluid, do not hesitate to consult our guideline for details. On the other hand, there are some measures and rules to follow that we will see in the following part of this guideline.
How to fill up the brake fluid of a Subaru Outback
So now we will show to you how to do the brake fluid level on a Subaru Outback. Please take note that this is very basic to do. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this info in the user manual of your Subaru Outback. Now here are the steps to stick to to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to find, it is generally made of whitish/transparent plastic, it is based on top of the master cylinder (metal part) and has a yellow cap.
- Once identified, browse the instructions on the cap cautiously so as not to make any mistakes within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Subaru Outback up to the mark “Max”.
- If the level was beneath the “Min” mark before you checked the brake fluid level in your Subaru Outback, remember to check the level in a few days/weeks to ensure that you don’t have a leak in the brake system
That’s it, you now have all the info you need to safely and securely fill the brake fluid level of your Subaru Outback.
If perhaps you have any further questions about the Subaru Outback, do not hesitate to consult our Subaru Outback category.