Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Subaru Forester is one of the great classics. Even though this action is elementary to accomplish, some of you are likely questioning why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Subaru Forester? We will now answer these questions.

check-brake-fluid-level-subaru-forester

Advantage to always have the brake fluid level up in your Subaru Forester

So we begin our article content with the benefit of looking at the brake fluid level on a Subaru Forester. This fluid has a fundamental function on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is therefore imperative to examine the brake fluid level of your Subaru Forester on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its characteristics. This process is really simple and does not require evolved knowledge of mechanics, so it is easy for all Subaru Forester owners to do it themselves. If the Brake light on the dashboard of your Subaru Forester does not match to a lack of brake fluid, do not hesitate to read our article content for details. On the other hand, there are some safety measures and rules to follow that we will see in the up coming part of this article content.

How to fill up the brake fluid of a Subaru Forester

So now we will show to you how to do the brake fluid level on a Subaru Forester. Please be aware that this is very basic to accomplish. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this info in the user manual of your Subaru Forester. Now here are the steps to stick to to make your level:

  • Open your bonnet and situate your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once established, examine the instructions on the cap attentively so as not to make any problems during the process, we recommend you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Subaru Forester up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Subaru Forester, make sure you examine the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Subaru Forester.

If perhaps you have any additional questions about the Subaru Forester, do not hesitate to consult our Subaru Forester category.