Among the small routine service acts that you should do regularly on your car, to fill up the brake fluid level of your Subaru Crosstrek is one of the great classics. Even though this action is elementary to execute, some of you are almost certainly wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Subaru Crosstrek? We will now answer these questions.


Benefit to always have the brake fluid level up in your Subaru Crosstrek

So we begin our content with the significance of checking the brake fluid level on a Subaru Crosstrek. This fluid has a vital task on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is consequently very important to check the brake fluid level of your Subaru Crosstrek regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid will lose its features. This process is extremely simple and does not require evolved expertise of mechanics, so it is easy for all Subaru Crosstrek owners to do it themselves. If the Brake light on the dashboard of your Subaru Crosstrek does not correspond to a lack of brake fluid, do not think twice to seek advice from our content for details. On the other hand, there are some precautions and rules to respect that we will notice in the next section of this content.

How to fill up the brake fluid of a Subaru Crosstrek

So now we will explain to you how to do the brake fluid level on a Subaru Crosstrek. Please notice that this is very elementary to do. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this information in the user manual of your Subaru Crosstrek. Now here are the steps to stick to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
  • Once located, examine the instructions on the cap mindfully so as not to make any problems within the the process, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Subaru Crosstrek up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Subaru Crosstrek, remember to check the level in a few days/weeks to make certain you don’t have a leak in the brake system

That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Subaru Crosstrek.

To get more tips on the Subaru Crosstrek, take a look at the Subaru Crosstrek category.