Among the small service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Skoda Kodiaq is one of the most classics. Although this process is basic to perform, some of you are probably wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Skoda Kodiaq? We will now answer these questions.

check-brake-fluid-level-skoda-kodiq

Benefit to always have the brake fluid level up in your Skoda Kodiaq

So we start our article with the benefit of verifying the brake fluid level on a Skoda Kodiaq. This fluid has a major role on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is therefore imperative to check the brake fluid level of your Skoda Kodiaq often (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its characteristics. This operation is particularly simple and does not require advanced expertise of mechanics, so it is easy for all Skoda Kodiaq owners to do it themselves. If the Brake light on the dashboard of your Skoda Kodiaq does not correspond to a lack of brake fluid, do not think twice to have a look at our article for details. Nevertheless, there are some safety measures and rules to respect that we will check out in the up coming part of this article.

How to fill up the brake fluid of a Skoda Kodiaq

So now we will describe to you how to do the brake fluid level on a Skoda Kodiaq. Please be aware that this is very basic to perform. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this info in the user manual of your Skoda Kodiaq. Now here are the steps to follow to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, examine the instructions on the cap carefully so as not to make any mistakes within the the operation, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Skoda Kodiaq up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Skoda Kodiaq, make sure to check the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Skoda Kodiaq.

If you wish more guides on the Skoda Kodiaq, go to our Skoda Kodiaq category.