Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Skoda Kamiq is one of the great classics. Although this action is elementary to do, some of you are probably wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Skoda Kamiq? We will now answer these questions.
Advantage to always have the brake fluid level up in your Skoda Kamiq
So we begin our guideline with the significance of verifying the brake fluid level on a Skoda Kamiq. This fluid has a crucial role on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is consequently fundamental to examine the brake fluid level of your Skoda Kamiq often (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid loses its properties. This operation is particularly simple and does not require advanced expertise of mechanics, so it is easy for all Skoda Kamiq owners to do it themselves. If the Brake light on the dashboard of your Skoda Kamiq does not match to a lack of brake fluid, do not hesitate to browse our guideline for details. However, there are some safety measures and rules to follow that we will notice in the next section of this guideline.
How to fill up the brake fluid of a Skoda Kamiq
So now we will describe to you how to do the brake fluid level on a Skoda Kamiq. Please be aware that this is very basic to complete. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this info in the user manual of your Skoda Kamiq. Now here are the steps to follow to make your level:
- Open your hood and identify your brake fluid reservoir, it is very easy to situate, it is usually made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
- Once discovered, browse the instructions on the cap carefully so as not to make any problems within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Skoda Kamiq up to the mark “Max”.
- If the level was under the “Min” mark before you examined the brake fluid level in your Skoda Kamiq, make sure examine the level in a few days/weeks to ensure that you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely fill the brake fluid level of your Skoda Kamiq.
If you have any additional questions about the Skoda Kamiq, do not hesitate to consult our Skoda Kamiq category.
