Among the small maintenance acts that you should do regularly on your car, to fill up the brake fluid level of your Renault Laguna 3 is one of the most classics. Even though this process is elementary to execute, some of you are most probably trying to figure out why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Renault Laguna 3? We will now answer these questions.

check-brake-fluid-level-renault-laguna-3

Benefit to always have the brake fluid level up in your Renault Laguna 3

So we start our content page with the interest of looking at the brake fluid level on a Renault Laguna 3. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is as a result necessary to verify the brake fluid level of your Renault Laguna 3 frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid will lose its characteristics. This process is extremely simple and does not require amazing experience of mechanics, so it is easy for all Renault Laguna 3 owners to do it themselves. If the Brake light on the dashboard of your Renault Laguna 3 does not match to a lack of brake fluid, do not think twice to read our content page for details. However, there are some precautions and rules to respect that we will check out in the up coming part of this content page.

How to fill up the brake fluid of a Renault Laguna 3

So now we will show to you how to do the brake fluid level on a Renault Laguna 3. Please be aware that this is very elementary to perform. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this information in the user manual of your Renault Laguna 3. Now here are the steps to adhere to to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once identified, examine the instructions on the cap attentively so as not to make any problems within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Renault Laguna 3 up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Renault Laguna 3, be sure to verify the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Renault Laguna 3.

If you need more tutorials on the Renault Laguna 3, go to our Renault Laguna 3 category.