Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Peugeot Partner Tepee is one of the great classics. Although this process is very easy to carry out, some of you are almost certainly concerned about why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Peugeot Partner Tepee? We will now answer these questions.

check-brake-fluid-level-peugeot-partner-tepee

Advantage to always have the brake fluid level up in your Peugeot Partner Tepee

So we begin our guideline with the benefit of checking the brake fluid level on a Peugeot Partner Tepee. This fluid has a vital task on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is consequently fundamental to check the brake fluid level of your Peugeot Partner Tepee regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid will lose its features. This process is specially simple and does not require amazing experience of mechanics, so it is easy for all Peugeot Partner Tepee owners to do it themselves. If the Brake light on the dashboard of your Peugeot Partner Tepee does not correspond to a lack of brake fluid, do not think twice to consult our guideline for details. However, there are some safety measures and rules to respect that we will check out in the next part of this guideline.

How to fill up the brake fluid of a Peugeot Partner Tepee

So now we will explain to you how to do the brake fluid level on a Peugeot Partner Tepee. Please note that this is very basic to perform. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this info in the user manual of your Peugeot Partner Tepee. Now here are the steps to stick to to make your level:

  • Open your bonnet and situate your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is placed on top of the master cylinder (metal part) and has a yellow cap.
  • Once located, read the instructions on the cap attentively so as not to make any mistakes within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Peugeot Partner Tepee up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Peugeot Partner Tepee, make sure you check the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to properly fill the brake fluid level of your Peugeot Partner Tepee.

To discover more tips on the Peugeot Partner Tepee, take a look at the Peugeot Partner Tepee category.