Among the small routine service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Peugeot 308 is one of the most classics. Even though this process is basic to complete, some of you are likely questioning why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Peugeot 308? We will now answer these questions.


Benefit to always have the brake fluid level up in your Peugeot 308

So we begin our article with the benefit of looking at the brake fluid level on a Peugeot 308. This fluid has a vital task on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is therefore imperative to examine the brake fluid level of your Peugeot 308 on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid will lose its characteristics. This procedure is specially simple and does not require evolved knowledge of mechanics, so it is easy for all Peugeot 308 owners to do it on their own. If the Brake light on the dashboard of your Peugeot 308 does not correspond to a lack of brake fluid, do not think twice to read our article for details. Nevertheless, there are some precautions and rules to follow that we will notice in the following section of this article.

How to fill up the brake fluid of a Peugeot 308

So now we will show to you how to do the brake fluid level on a Peugeot 308. Please note that this is very basic to carry out. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Peugeot 308. Now here are the steps to follow to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once established, examine the instructions on the cap attentively so as not to make any mistakes within the the procedure, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Peugeot 308 up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Peugeot 308, make sure to examine the level in a few days/weeks to ensure you don’t have a leak in the brake system

That’s it, you now have all the info you need to safely and securely fill the brake fluid level of your Peugeot 308.

To discover more tips on the Peugeot 308, take a look at the Peugeot 308 category.