Among the small service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Nissan Micra 2 is one of the great classics. Even though this act is elementary to perform, some of you are probably wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Nissan Micra 2? We will now answer these questions.

check-brake-fluid-level-nissan-micra-2

Advantage to always have the brake fluid level up in your Nissan Micra 2

So we begin our content with the benefit of verifying the brake fluid level on a Nissan Micra 2. This fluid has a vital role on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is therefore very important to verify the brake fluid level of your Nissan Micra 2 regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its attributes. This procedure is extremely simple and does not require advanced expertise of mechanics, so it is easy for all Nissan Micra 2 owners to do it themselves. If the Brake light on the dashboard of your Nissan Micra 2 does not match to a lack of brake fluid, do not hesitate to read our content for details. Nevertheless, there are some measures and rules to respect that we will notice in the following section of this content.

How to fill up the brake fluid of a Nissan Micra 2

So now we will explain to you how to do the brake fluid level on a Nissan Micra 2. Please take note that this is very elementary to complete. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this data in the user manual of your Nissan Micra 2. Now here are the steps to stick to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, browse the instructions on the cap cautiously so as not to make any mistakes during the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Nissan Micra 2 up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Nissan Micra 2, make sure verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to securely fill the brake fluid level of your Nissan Micra 2.

If you wish more guides on the Nissan Micra 2, go to our Nissan Micra 2 category.