Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Nissan Cabstar is one of the great classics. Nevertheless this work is very easy to conduct, some of you are almost certainly concerned about why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Nissan Cabstar? We will now answer these questions.

check-brake-fluid-level-nissan-cabstar

Advantage to always have the brake fluid level up in your Nissan Cabstar

So we start our article with the interest of looking at the brake fluid level on a Nissan Cabstar. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is as a result imperative to verify the brake fluid level of your Nissan Cabstar regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its properties. This procedure is really simple and does not require evolved knowledge of mechanics, so it is easy for all Nissan Cabstar owners to do it themselves. If the Brake light on the dashboard of your Nissan Cabstar does not match to a lack of brake fluid, do not think twice to have a look at our article for details. On the other hand, there are some measures and rules to follow that we will check out in the following part of this article.

How to fill up the brake fluid of a Nissan Cabstar

So now we will show to you how to do the brake fluid level on a Nissan Cabstar. Please take note that this is very elementary to do. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Nissan Cabstar. Now here are the steps to follow to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once found, examine the instructions on the cap mindfully so as not to make any problems during the procedure, we suggest you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Nissan Cabstar up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Nissan Cabstar, be sure to verify the level in a few days/weeks to be certain you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to securely fill the brake fluid level of your Nissan Cabstar.

If you have any further questions about the Nissan Cabstar, do not hesitate to consult our Nissan Cabstar category.