Among the small routine service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Mini Mini 3 is one of the most classics. Although this act is basic to conduct, some of you are almost certainly concerned about why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Mini Mini 3? We will now answer these questions.
Benefit to always have the brake fluid level up in your Mini Mini 3
So we start our content page with the significance of checking the brake fluid level on a Mini Mini 3. This fluid has a fundamental function on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is as a result imperative to check the brake fluid level of your Mini Mini 3 often (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid will lose its features. This procedure is particularly simple and does not require advanced knowledge of mechanics, so it is easy for all Mini Mini 3 owners to do it on their own. If the Brake light on the dashboard of your Mini Mini 3 does not correspond to a lack of brake fluid, do not think twice to browse our content page for details. On the other hand, there are some measures and rules to follow that we will discover in the next section of this content page.
How to fill up the brake fluid of a Mini Mini 3
So now we will show to you how to do the brake fluid level on a Mini Mini 3. Please notice that this is very simple to carry out. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this information in the user manual of your Mini Mini 3. Now here are the steps to adhere to to make your level:
- Open your bonnet and situate your brake fluid reservoir, it is very easy to situate, it is usually made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
- Once discovered, examine the instructions on the cap attentively so as not to make any mistakes within the the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Mini Mini 3 up to the mark “Max”.
- If the level was under the “Min” mark before you examined the brake fluid level in your Mini Mini 3, be sure to check the level in a few days/weeks to make certain you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Mini Mini 3.
To get more tips on the Mini Mini 3, take a look at the Mini Mini 3 category.
