Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Mercury Mariner is one of the most classics. Nevertheless this work is simple to execute, some of you are most likely wanting to know why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Mercury Mariner? We will now answer these questions.
Advantage to always have the brake fluid level up in your Mercury Mariner
So we commence our content with the significance of looking at the brake fluid level on a Mercury Mariner. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is as a result necessary to examine the brake fluid level of your Mercury Mariner on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This operation is specially simple and does not require advanced experience of mechanics, so it is easy for all Mercury Mariner owners to do it themselves. If the Brake light on the dashboard of your Mercury Mariner does not match to a lack of brake fluid, do not think twice to read our content for details. Nevertheless, there are some safety measures and rules to respect that we will see in the next section of this content.
How to fill up the brake fluid of a Mercury Mariner
So now we will describe to you how to do the brake fluid level on a Mercury Mariner. Please be aware that this is very elementary to carry out. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this information in the user manual of your Mercury Mariner. Now here are the steps to stick to to make your level:
- Open your cover and locate your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
- Once identified, browse the instructions on the cap carefully so as not to make any mistakes during the operation, we encourage you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercury Mariner up to the mark “Max”.
- If the level was below the “Min” mark before you inspected the brake fluid level in your Mercury Mariner, make sure you examine the level in a few days/weeks to be sure you don’t have a leak in the brake system
That’s it, you now have all the information you need to securely fill the brake fluid level of your Mercury Mariner.
To discover more tips on the Mercury Mariner, take a look at the Mercury Mariner category.