Among the small service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Mercedes Classe S is one of the great classics. Nevertheless this work is basic to accomplish, some of you are probably wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mercedes Classe S? We will now answer these questions.

check-brake-fluid-level-mercedes-classe-s

Advantage to always have the brake fluid level up in your Mercedes Classe S

So we begin our article content with the significance of verifying the brake fluid level on a Mercedes Classe S. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that after a while you may lose brake fluid without any particular leak (without any leakage). It is consequently important to check the brake fluid level of your Mercedes Classe S regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid loses its properties. This process is particularly simple and does not require advanced experience of mechanics, so it is easy for all Mercedes Classe S owners to do it on their own. If the Brake light on the dashboard of your Mercedes Classe S does not correspond to a lack of brake fluid, do not hesitate to consult our article content for details. On the other hand, there are some safety measures and rules to follow that we will discover in the following part of this article content.

How to fill up the brake fluid of a Mercedes Classe S

So now we will explain to you how to do the brake fluid level on a Mercedes Classe S. Please notice that this is very simple to do. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Mercedes Classe S. Now here are the steps to follow to make your level:

  • Open your hood and identify your brake fluid reservoir, it is very easy to situate, it is usually made of whitish/transparent plastic, it is based on top of the master cylinder (metal part) and has a yellow cap.
  • Once identified, examine the instructions on the cap carefully so as not to make any problems during the process, we suggest you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes Classe S up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Mercedes Classe S, make sure you check the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to securely fill the brake fluid level of your Mercedes Classe S.

If you wish more tutorials on the Mercedes Classe S, go to our Mercedes Classe S category.