Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Mercedes Classe C 2 is one of the great classics. Nevertheless this act is very easy to conduct, some of you are most likely attempting to find why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Mercedes Classe C 2? We will now answer these questions.

check-brake-fluid-level-mercedes-classe-c-2

Advantage to always have the brake fluid level up in your Mercedes Classe C 2

So we start our content page with the interest of checking the brake fluid level on a Mercedes Classe C 2. This fluid has an important function on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is consequently imperative to verify the brake fluid level of your Mercedes Classe C 2 often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because over time the brake fluid will lose its characteristics. This procedure is extremely simple and does not require amazing knowledge of mechanics, so it is easy for all Mercedes Classe C 2 owners to do it themselves. If the Brake light on the dashboard of your Mercedes Classe C 2 does not match to a lack of brake fluid, do not be reluctant to browse our content page for details. However, there are some measures and rules to respect that we will notice in the up coming section of this content page.

How to fill up the brake fluid of a Mercedes Classe C 2

So now we will describe to you how to do the brake fluid level on a Mercedes Classe C 2. Please be aware that this is very basic to accomplish. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Mercedes Classe C 2. Now here are the steps to stick to to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, read the instructions on the cap mindfully so as not to make any mistakes within the the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Mercedes Classe C 2 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you checked the brake fluid level in your Mercedes Classe C 2, make sure to verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Mercedes Classe C 2.

To get more tips on the Mercedes Classe C 2, take a look at the Mercedes Classe C 2 category.