Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Mercedes Classe B is one of the most classics. Even though this action is basic to do, some of you are probably trying to figure out why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Mercedes Classe B? We will now answer these questions.

check-brake-fluid-level-mercedes-classe-b

Benefit to always have the brake fluid level up in your Mercedes Classe B

So we begin our content page with the significance of looking at the brake fluid level on a Mercedes Classe B. This fluid has an important role on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is consequently very important to examine the brake fluid level of your Mercedes Classe B regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its characteristics. This process is specially simple and does not require advanced expertise of mechanics, so it is easy for all Mercedes Classe B owners to do it themselves. If the Brake light on the dashboard of your Mercedes Classe B does not correspond to a lack of brake fluid, do not be reluctant to have a look at our content page for details. However, there are some measures and rules to follow that we will notice in the up coming part of this content page.

How to fill up the brake fluid of a Mercedes Classe B

So now we will learn to you how to do the brake fluid level on a Mercedes Classe B. Please be aware that this is very elementary to accomplish. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this info in the user manual of your Mercedes Classe B. Now here are the steps to adhere to to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
  • Once established, examine the instructions on the cap cautiously so as not to make any problems within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes Classe B up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Mercedes Classe B, make sure to examine the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to properly fill the brake fluid level of your Mercedes Classe B.

If you need more tutorials on the Mercedes Classe B, go to our Mercedes Classe B category.