Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Mercedes Classe B 2 is one of the great classics. Even though this process is simple to accomplish, some of you are most probably wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mercedes Classe B 2? We will now answer these questions.

check-brake-fluid-level-mercedes-classe-b-2

Benefit to always have the brake fluid level up in your Mercedes Classe B 2

So we start our content with the interest of verifying the brake fluid level on a Mercedes Classe B 2. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is consequently necessary to examine the brake fluid level of your Mercedes Classe B 2 frequently (every 10,000km for example). It is also beneficial to flush the system every 50,000km because over time the brake fluid loses its features. This procedure is specially simple and does not require evolved knowledge of mechanics, so it is easy for all Mercedes Classe B 2 owners to do it themselves. If the Brake light on the dashboard of your Mercedes Classe B 2 does not match to a lack of brake fluid, do not think twice to read our content for details. Nevertheless, there are some safety measures and rules to respect that we will notice in the following section of this content.

How to fill up the brake fluid of a Mercedes Classe B 2

So now we will describe to you how to do the brake fluid level on a Mercedes Classe B 2. Please notice that this is very simple to accomplish. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Mercedes Classe B 2. Now here are the steps to stick to to make your level:

  • Open your cover and situate your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
  • Once established, read the instructions on the cap mindfully so as not to make any problems during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes Classe B 2 up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Mercedes Classe B 2, make sure you examine the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Mercedes Classe B 2.

If you have any further questions about the Mercedes Classe B 2, do not hesitate to consult our Mercedes Classe B 2 category.