Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Mercedes C class is one of the most classics. Even though this work is very easy to do, some of you are almost certainly attempting to find why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Mercedes C class? We will now answer these questions.
Benefit to always have the brake fluid level up in your Mercedes C class
So we begin our content with the interest of verifying the brake fluid level on a Mercedes C class. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is therefore fundamental to verify the brake fluid level of your Mercedes C class often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid loses its attributes. This operation is specially simple and does not require amazing expertise of mechanics, so it is easy for all Mercedes C class owners to do it on their own. If the Brake light on the dashboard of your Mercedes C class does not correspond to a lack of brake fluid, do not think twice to read our content for details. However, there are some safety measures and rules to respect that we will see in the following section of this content.
How to fill up the brake fluid of a Mercedes C class
So now we will show to you how to do the brake fluid level on a Mercedes C class. Please take note that this is very elementary to complete. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this data in the user manual of your Mercedes C class. Now here are the steps to adhere to to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
- Once identified, browse the instructions on the cap mindfully so as not to make any problems within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Mercedes C class up to the mark “Max”.
- If the level was below the “Min” mark before you examined the brake fluid level in your Mercedes C class, make sure verify the level in a few days/weeks to ensure you don’t have a leak in the brake system
That’s it, you now have all the information you need to securely fill the brake fluid level of your Mercedes C class.
If you need more tutorials on the Mercedes C class, go to our Mercedes C class category.