Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Mercedes Benz S Class is one of the most classics. Even though this act is simple to execute, some of you are likely wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mercedes Benz S Class? We will now answer these questions.
Advantage to always have the brake fluid level up in your Mercedes Benz S Class
So we begin our content page with the significance of checking the brake fluid level on a Mercedes Benz S Class. This fluid has an important task on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is as a result important to verify the brake fluid level of your Mercedes Benz S Class on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid will lose its attributes. This procedure is specially simple and does not require amazing knowledge of mechanics, so it is easy for all Mercedes Benz S Class owners to do it themselves. If the Brake light on the dashboard of your Mercedes Benz S Class does not correspond to a lack of brake fluid, do not hesitate to browse our content page for details. Nevertheless, there are some measures and rules to follow that we will notice in the following section of this content page.
How to fill up the brake fluid of a Mercedes Benz S Class
So now we will show to you how to do the brake fluid level on a Mercedes Benz S Class. Please note that this is very basic to carry out. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this data in the user manual of your Mercedes Benz S Class. Now here are the steps to follow to make your level:
- Open your bonnet and find your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
- Once uncovered, browse the instructions on the cap carefully so as not to make any problems during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes Benz S Class up to the mark “Max”.
- If the level was under the “Min” mark before you inspected the brake fluid level in your Mercedes Benz S Class, remember to verify the level in a few days/weeks to be sure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely fill the brake fluid level of your Mercedes Benz S Class.
To discover more tips on the Mercedes Benz S Class, take a look at the Mercedes Benz S Class category.