Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Mercedes A class is one of the most classics. Even though this work is simple to do, some of you are most likely attempting to find why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mercedes A class? We will now answer these questions.
Advantage to always have the brake fluid level up in your Mercedes A class
So we begin our content with the significance of verifying the brake fluid level on a Mercedes A class. This fluid has a major role on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is therefore very important to examine the brake fluid level of your Mercedes A class frequently (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid loses its attributes. This operation is specially simple and does not require advanced knowledge of mechanics, so it is easy for all Mercedes A class owners to do it themselves. If the Brake light on the dashboard of your Mercedes A class does not match to a lack of brake fluid, do not hesitate to read our content for details. Nevertheless, there are some safety measures and rules to respect that we will check out in the up coming section of this content.
How to fill up the brake fluid of a Mercedes A class
So now we will describe to you how to do the brake fluid level on a Mercedes A class. Please take note that this is very elementary to carry out. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Mercedes A class. Now here are the steps to stick to to make your level:
- Open your cover and locate your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
- Once uncovered, examine the instructions on the cap attentively so as not to make any mistakes during the operation, we advise you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes A class up to the mark “Max”.
- If the level was under the “Min” mark before you inspected the brake fluid level in your Mercedes A class, make sure you examine the level in a few days/weeks to make sure you don’t have a leak in the brake system
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Mercedes A class.
If you need more tutorials on the Mercedes A class, go to our Mercedes A class category.