Among the small routine service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Mazda 6 is one of the great classics. Nevertheless this process is very easy to do, some of you are likely wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mazda 6? We will now answer these questions.

check-brake-fluid-level-mazda-6

Benefit to always have the brake fluid level up in your Mazda 6

So we begin our content with the interest of looking at the brake fluid level on a Mazda 6. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is as a result essential to check the brake fluid level of your Mazda 6 regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its properties. This process is really simple and does not require advanced experience of mechanics, so it is easy for all Mazda 6 owners to do it on their own. If the Brake light on the dashboard of your Mazda 6 does not match to a lack of brake fluid, do not think twice to consult our content for details. Nevertheless, there are some safety measures and rules to follow that we will notice in the up coming part of this content.

How to fill up the brake fluid of a Mazda 6

So now we will explain to you how to do the brake fluid level on a Mazda 6. Please be aware that this is very simple to perform. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Mazda 6. Now here are the steps to stick to to make your level:

  • Open your bonnet and situate your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once established, browse the instructions on the cap carefully so as not to make any mistakes during the process, we suggest you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Mazda 6 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Mazda 6, make sure you check the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Mazda 6.

If you have any further questions about the Mazda 6, do not hesitate to consult our Mazda 6 category.