Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Lincoln MKS is one of the most classics. Although this work is simple to accomplish, some of you are most likely concerned about why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Lincoln MKS? We will now answer these questions.

check-brake-fluid-level-lincoln-mks

Advantage to always have the brake fluid level up in your Lincoln MKS

So we commence our content page with the interest of looking at the brake fluid level on a Lincoln MKS. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is therefore fundamental to check the brake fluid level of your Lincoln MKS regularly (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid loses its properties. This procedure is specially simple and does not require advanced knowledge of mechanics, so it is easy for all Lincoln MKS owners to do it on their own. If the Brake light on the dashboard of your Lincoln MKS does not match to a lack of brake fluid, do not think twice to seek advice from our content page for details. On the other hand, there are some precautions and rules to follow that we will discover in the next section of this content page.

How to fill up the brake fluid of a Lincoln MKS

So now we will describe to you how to do the brake fluid level on a Lincoln MKS. Please note that this is very basic to complete. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Lincoln MKS. Now here are the steps to follow to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
  • Once discovered, examine the instructions on the cap attentively so as not to make any mistakes during the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Lincoln MKS up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Lincoln MKS, remember to check the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to safely fill the brake fluid level of your Lincoln MKS.

To discover more tips on the Lincoln MKS, take a look at the Lincoln MKS category.