Among the small service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Lexus UX is one of the most classics. Nevertheless this act is very easy to accomplish, some of you are most probably wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Lexus UX? We will now answer these questions.
Benefit to always have the brake fluid level up in your Lexus UX
So we begin our content page with the interest of verifying the brake fluid level on a Lexus UX. This fluid has a fundamental role on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is therefore essential to verify the brake fluid level of your Lexus UX on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid will lose its properties. This operation is extremely simple and does not require advanced knowledge of mechanics, so it is easy for all Lexus UX owners to do it on their own. If the Brake light on the dashboard of your Lexus UX does not match to a lack of brake fluid, do not hesitate to have a look at our content page for details. On the other hand, there are some measures and rules to respect that we will check out in the following part of this content page.
How to fill up the brake fluid of a Lexus UX
So now we will explain to you how to do the brake fluid level on a Lexus UX. Please note that this is very basic to carry out. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Lexus UX. Now here are the steps to stick to to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is based on top of the master cylinder (metal part) and has a yellow cap.
- Once found, examine the instructions on the cap cautiously so as not to make any problems within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Lexus UX up to the mark “Max”.
- If the level was beneath the “Min” mark before you checked the brake fluid level in your Lexus UX, make sure verify the level in a few days/weeks to be certain you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to securely fill the brake fluid level of your Lexus UX.
Whenever you have any further questions about the Lexus UX, do not hesitate to consult our Lexus UX category.
