Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Land Rover Evoque is one of the great classics. Even though this process is basic to perform, some of you are likely questioning why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Land Rover Evoque? We will now answer these questions.


Benefit to always have the brake fluid level up in your Land Rover Evoque

So we start our article content with the interest of checking the brake fluid level on a Land Rover Evoque. This fluid has an important task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is therefore important to examine the brake fluid level of your Land Rover Evoque often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid loses its features. This process is particularly simple and does not require amazing expertise of mechanics, so it is easy for all Land Rover Evoque owners to do it themselves. If the Brake light on the dashboard of your Land Rover Evoque does not match to a lack of brake fluid, do not think twice to browse our article content for details. On the other hand, there are some measures and rules to respect that we will discover in the following part of this article content.

How to fill up the brake fluid of a Land Rover Evoque

So now we will show to you how to do the brake fluid level on a Land Rover Evoque. Please note that this is very elementary to accomplish. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this data in the user manual of your Land Rover Evoque. Now here are the steps to stick to to make your level:

  • Open your hood and identify your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
  • Once established, read the instructions on the cap attentively so as not to make any problems within the the process, we suggest you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Land Rover Evoque up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Land Rover Evoque, be sure to examine the level in a few days/weeks to make sure you don’t have a leak in the brake system

That’s it, you now have all the data you need to safely fill the brake fluid level of your Land Rover Evoque.

If you want more tutorials on the Land Rover Evoque, go to our Land Rover Evoque category.