Among the small routine service acts that you should do regularly on your car, to fill up the brake fluid level of your Land Rover Defender is one of the great classics. Although this work is elementary to carry out, some of you are most likely wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Land Rover Defender? We will now answer these questions.

check-brake-fluid-level-land-rover-defender

Advantage to always have the brake fluid level up in your Land Rover Defender

So we commence our article with the significance of checking the brake fluid level on a Land Rover Defender. This fluid has a vital role on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is therefore essential to verify the brake fluid level of your Land Rover Defender regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid will lose its features. This operation is particularly simple and does not require evolved experience of mechanics, so it is easy for all Land Rover Defender owners to do it on their own. If the Brake light on the dashboard of your Land Rover Defender does not correspond to a lack of brake fluid, do not be reluctant to consult our article for details. On the other hand, there are some precautions and rules to follow that we will discover in the next section of this article.

How to fill up the brake fluid of a Land Rover Defender

So now we will explain to you how to do the brake fluid level on a Land Rover Defender. Please notice that this is very simple to do. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this information in the user manual of your Land Rover Defender. Now here are the steps to adhere to to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once discovered, examine the instructions on the cap mindfully so as not to make any problems within the the operation, we suggest you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Land Rover Defender up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Land Rover Defender, be sure to verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Land Rover Defender.

To discover more tips on the Land Rover Defender, take a look at the Land Rover Defender category.