Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Jeep Wrangler is one of the great classics. Even though this act is basic to do, some of you are almost certainly wanting to know why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Jeep Wrangler? We will now answer these questions.


Advantage to always have the brake fluid level up in your Jeep Wrangler

So we begin our guideline with the significance of looking at the brake fluid level on a Jeep Wrangler. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is as a result very important to examine the brake fluid level of your Jeep Wrangler frequently (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid loses its properties. This procedure is specially simple and does not require advanced expertise of mechanics, so it is easy for all Jeep Wrangler owners to do it on their own. If the Brake light on the dashboard of your Jeep Wrangler does not match to a lack of brake fluid, do not hesitate to have a look at our guideline for details. On the other hand, there are some safety measures and rules to respect that we will discover in the following section of this guideline.

How to fill up the brake fluid of a Jeep Wrangler

So now we will explain to you how to do the brake fluid level on a Jeep Wrangler. Please take note that this is very simple to accomplish. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this info in the user manual of your Jeep Wrangler. Now here are the steps to stick to to make your level:

  • Open your hood and locate your brake fluid reservoir, it is very easy to find, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
  • Once identified, read the instructions on the cap mindfully so as not to make any mistakes during the procedure, we advise you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Jeep Wrangler up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Jeep Wrangler, remember to examine the level in a few days/weeks to ensure you don’t have a leak in the brake system

That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Jeep Wrangler.

If you wish more tutorials on the Jeep Wrangler, go to our Jeep Wrangler category.