Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Jeep Renegade is one of the most classics. Even though this work is elementary to execute, some of you are likely concerned about why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Jeep Renegade? We will now answer these questions.

check-brake-fluid-level-jeep-renegade

Advantage to always have the brake fluid level up in your Jeep Renegade

So we commence our content with the interest of verifying the brake fluid level on a Jeep Renegade. This fluid has an essential role on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is as a result essential to verify the brake fluid level of your Jeep Renegade regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid will lose its properties. This procedure is particularly simple and does not require advanced knowledge of mechanics, so it is easy for all Jeep Renegade owners to do it themselves. If the Brake light on the dashboard of your Jeep Renegade does not correspond to a lack of brake fluid, do not hesitate to browse our content for details. However, there are some safety measures and rules to follow that we will notice in the up coming part of this content.

How to fill up the brake fluid of a Jeep Renegade

So now we will learn to you how to do the brake fluid level on a Jeep Renegade. Please be aware that this is very basic to perform. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Jeep Renegade. Now here are the steps to follow to make your level:

  • Open your hood and find your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is based over the master cylinder (metal part) and has a yellow cap.
  • Once established, read the instructions on the cap cautiously so as not to make any problems during the procedure, we suggest you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Jeep Renegade up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Jeep Renegade, make sure verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to securely fill the brake fluid level of your Jeep Renegade.

To discover more tips on the Jeep Renegade, take a look at the Jeep Renegade category.