Among the small routine service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Jeep Patriot is one of the great classics. Although this act is basic to perform, some of you are most probably trying to figure out why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Jeep Patriot? We will now answer these questions.
Benefit to always have the brake fluid level up in your Jeep Patriot
So we commence our article with the interest of verifying the brake fluid level on a Jeep Patriot. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is consequently very important to examine the brake fluid level of your Jeep Patriot often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because over time the brake fluid will lose its characteristics. This process is extremely simple and does not require amazing expertise of mechanics, so it is easy for all Jeep Patriot owners to do it themselves. If the Brake light on the dashboard of your Jeep Patriot does not correspond to a lack of brake fluid, do not think twice to seek advice from our article for details. Nevertheless, there are some precautions and rules to respect that we will notice in the following part of this article.
How to fill up the brake fluid of a Jeep Patriot
So now we will learn to you how to do the brake fluid level on a Jeep Patriot. Please note that this is very simple to perform. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Jeep Patriot. Now here are the steps to follow to make your level:
- Open your hood and identify your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is based over the master cylinder (metal part) and has a yellow cap.
- Once identified, examine the instructions on the cap carefully so as not to make any mistakes within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Jeep Patriot up to the mark “Max”.
- If the level was under the “Min” mark before you inspected the brake fluid level in your Jeep Patriot, make sure examine the level in a few days/weeks to be certain you don’t have a leak in the brake system
That’s it, you now have all the info you need to properly fill the brake fluid level of your Jeep Patriot.
To discover more tips on the Jeep Patriot, take a look at the Jeep Patriot category.