Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Jeep Liberty is one of the great classics. Even though this work is basic to perform, some of you are almost certainly trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Jeep Liberty? We will now answer these questions.


Benefit to always have the brake fluid level up in your Jeep Liberty

So we commence our article content with the benefit of checking the brake fluid level on a Jeep Liberty. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is consequently essential to verify the brake fluid level of your Jeep Liberty on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid loses its properties. This operation is extremely simple and does not require amazing experience of mechanics, so it is easy for all Jeep Liberty owners to do it on their own. If the Brake light on the dashboard of your Jeep Liberty does not correspond to a lack of brake fluid, do not be reluctant to seek advice from our article content for details. Nevertheless, there are some precautions and rules to follow that we will notice in the next part of this article content.

How to fill up the brake fluid of a Jeep Liberty

So now we will describe to you how to do the brake fluid level on a Jeep Liberty. Please notice that this is very basic to accomplish. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this information in the user manual of your Jeep Liberty. Now here are the steps to follow to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
  • Once established, browse the instructions on the cap carefully so as not to make any problems within the the operation, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Jeep Liberty up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Jeep Liberty, make sure verify the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Jeep Liberty.

If you want more tutorials on the Jeep Liberty, go to our Jeep Liberty category.