Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Infiniti QX30 is one of the most classics. Although this action is very easy to carry out, some of you are likely wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Infiniti QX30? We will now answer these questions.

check-brake-fluid-level-infiniti-qx30

Advantage to always have the brake fluid level up in your Infiniti QX30

So we start our content with the interest of looking at the brake fluid level on a Infiniti QX30. This fluid has an important role on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is therefore fundamental to examine the brake fluid level of your Infiniti QX30 frequently (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid loses its characteristics. This process is specially simple and does not require evolved knowledge of mechanics, so it is easy for all Infiniti QX30 owners to do it on their own. If the Brake light on the dashboard of your Infiniti QX30 does not correspond to a lack of brake fluid, do not think twice to seek advice from our content for details. On the other hand, there are some safety measures and rules to follow that we will notice in the following section of this content.

How to fill up the brake fluid of a Infiniti QX30

So now we will learn to you how to do the brake fluid level on a Infiniti QX30. Please notice that this is very simple to do. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Infiniti QX30. Now here are the steps to adhere to to make your level:

  • Open your hood and find your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once established, read the instructions on the cap carefully so as not to make any problems during the process, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Infiniti QX30 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Infiniti QX30, make sure to examine the level in a few days/weeks to be certain you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely fill the brake fluid level of your Infiniti QX30.

If you have any additional questions about the Infiniti QX30, do not hesitate to consult our Infiniti QX30 category.