Among the small routine service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Infiniti Q50 is one of the most classics. Even though this act is simple to perform, some of you are likely concerned about why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Infiniti Q50? We will now answer these questions.


Advantage to always have the brake fluid level up in your Infiniti Q50

So we start our article content with the significance of checking the brake fluid level on a Infiniti Q50. This fluid has a crucial role on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is as a result essential to examine the brake fluid level of your Infiniti Q50 on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its characteristics. This operation is particularly simple and does not require evolved experience of mechanics, so it is easy for all Infiniti Q50 owners to do it themselves. If the Brake light on the dashboard of your Infiniti Q50 does not correspond to a lack of brake fluid, do not hesitate to browse our article content for details. Nevertheless, there are some safety measures and rules to follow that we will notice in the next section of this article content.

How to fill up the brake fluid of a Infiniti Q50

So now we will explain to you how to do the brake fluid level on a Infiniti Q50. Please note that this is very elementary to carry out. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Infiniti Q50. Now here are the steps to adhere to to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to find, it is usually made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once discovered, examine the instructions on the cap mindfully so as not to make any problems within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Infiniti Q50 up to the mark “Max”.
  • If the level was under the “Min” mark before you examined the brake fluid level in your Infiniti Q50, make sure to examine the level in a few days/weeks to ensure that you don’t have a leak in the brake system

That’s it, you now have all the data you need to properly fill the brake fluid level of your Infiniti Q50.

To get more tips on the Infiniti Q50, take a look at the Infiniti Q50 category.