Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your hyundai i10 is one of the most classics. Even though this action is very easy to perform, some of you are most probably questioning why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your hyundai i10? We will now answer these questions.

check-brake-fluid-level-hyundai-i10

Advantage to always have the brake fluid level up in your hyundai i10

So we begin our article with the significance of looking at the brake fluid level on a hyundai i10. This fluid has an important function on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is therefore essential to check the brake fluid level of your hyundai i10 regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid loses its features. This process is extremely simple and does not require evolved expertise of mechanics, so it is easy for all hyundai i10 owners to do it themselves. If the Brake light on the dashboard of your hyundai i10 does not match to a lack of brake fluid, do not be reluctant to seek advice from our article for details. Nevertheless, there are some precautions and rules to follow that we will discover in the following section of this article.

How to fill up the brake fluid of a hyundai i10

So now we will show to you how to do the brake fluid level on a hyundai i10. Please take note that this is very elementary to perform. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this data in the user manual of your hyundai i10. Now here are the steps to adhere to to make your level:

  • Open your cover and situate your brake fluid reservoir, it is very easy to identify, it is usually made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, browse the instructions on the cap carefully so as not to make any mistakes during the process, we advise you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your hyundai i10 up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your hyundai i10, remember to check the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your hyundai i10.

If perhaps you have any further questions about the hyundai i10, do not hesitate to consult our hyundai i10 category.