Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Hyundai Bayon is one of the great classics. Nevertheless this work is elementary to complete, some of you are likely attempting to find why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Hyundai Bayon? We will now answer these questions.

check-brake-fluid-level-hyundai-bayon

Benefit to always have the brake fluid level up in your Hyundai Bayon

So we start our content with the interest of checking the brake fluid level on a Hyundai Bayon. This fluid has an important role on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is consequently imperative to verify the brake fluid level of your Hyundai Bayon regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because as time passes the brake fluid will lose its characteristics. This operation is extremely simple and does not require evolved experience of mechanics, so it is easy for all Hyundai Bayon owners to do it themselves. If the Brake light on the dashboard of your Hyundai Bayon does not correspond to a lack of brake fluid, do not hesitate to read our content for details. However, there are some safety measures and rules to follow that we will notice in the following part of this content.

How to fill up the brake fluid of a Hyundai Bayon

So now we will learn to you how to do the brake fluid level on a Hyundai Bayon. Please take note that this is very simple to accomplish. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Hyundai Bayon. Now here are the steps to stick to to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, browse the instructions on the cap mindfully so as not to make any mistakes within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Hyundai Bayon up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Hyundai Bayon, make sure you verify the level in a few days/weeks to ensure that you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Hyundai Bayon.

If perhaps you have any additional questions about the Hyundai Bayon, do not hesitate to consult our Hyundai Bayon category.