Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Honda Fit is one of the most classics. Although this work is very easy to carry out, some of you are almost certainly questioning why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Honda Fit? We will now answer these questions.
Advantage to always have the brake fluid level up in your Honda Fit
So we begin our content page with the interest of looking at the brake fluid level on a Honda Fit. This fluid has an essential function on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is as a result imperative to check the brake fluid level of your Honda Fit on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid will lose its properties. This procedure is extremely simple and does not require advanced knowledge of mechanics, so it is easy for all Honda Fit owners to do it on their own. If the Brake light on the dashboard of your Honda Fit does not correspond to a lack of brake fluid, do not hesitate to consult our content page for details. Nevertheless, there are some precautions and rules to respect that we will notice in the following section of this content page.
How to fill up the brake fluid of a Honda Fit
So now we will describe to you how to do the brake fluid level on a Honda Fit. Please notice that this is very basic to do. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this information in the user manual of your Honda Fit. Now here are the steps to follow to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
- Once discovered, browse the instructions on the cap mindfully so as not to make any mistakes during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Honda Fit up to the mark “Max”.
- If the level was beneath the “Min” mark before you examined the brake fluid level in your Honda Fit, make sure check the level in a few days/weeks to ensure you don’t have a leak in the brake system
That’s it, you now have all the data you need to securely fill the brake fluid level of your Honda Fit.
If you wish more tutorials on the Honda Fit, go to our Honda Fit category.