Among the small routine service acts that you should do regularly on your car, to fill up the brake fluid level of your Honda Civic is one of the most classics. Even though this act is elementary to conduct, some of you are probably wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Honda Civic? We will now answer these questions.
Advantage to always have the brake fluid level up in your Honda Civic
So we start our content with the significance of verifying the brake fluid level on a Honda Civic. This fluid has a vital task on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is as a result fundamental to check the brake fluid level of your Honda Civic frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid will lose its features. This operation is particularly simple and does not require amazing knowledge of mechanics, so it is easy for all Honda Civic owners to do it themselves. If the Brake light on the dashboard of your Honda Civic does not correspond to a lack of brake fluid, do not think twice to have a look at our content for details. However, there are some safety measures and rules to respect that we will notice in the next part of this content.
How to fill up the brake fluid of a Honda Civic
So now we will learn to you how to do the brake fluid level on a Honda Civic. Please note that this is very basic to carry out. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this data in the user manual of your Honda Civic. Now here are the steps to stick to to make your level:
- Open your cover and situate your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
- Once established, examine the instructions on the cap attentively so as not to make any mistakes within the the operation, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Honda Civic up to the mark “Max”.
- If the level was under the “Min” mark before you checked the brake fluid level in your Honda Civic, be sure to check the level in a few days/weeks to be sure you don’t have a leak in the brake system
That’s it, you now have all the information you need to safely fill the brake fluid level of your Honda Civic.
If you have any further questions about the Honda Civic, do not hesitate to consult our Honda Civic category.