Among the small routine service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Genesis G80 is one of the great classics. Although this process is elementary to carry out, some of you are most probably questioning why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Genesis G80? We will now answer these questions.

check-brake-fluid-level-genesis-g80

Advantage to always have the brake fluid level up in your Genesis G80

So we commence our article content with the benefit of checking the brake fluid level on a Genesis G80. This fluid has an important task on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is therefore essential to check the brake fluid level of your Genesis G80 often (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid will lose its attributes. This operation is extremely simple and does not require advanced expertise of mechanics, so it is easy for all Genesis G80 owners to do it themselves. If the Brake light on the dashboard of your Genesis G80 does not correspond to a lack of brake fluid, do not hesitate to consult our article content for details. However, there are some measures and rules to respect that we will see in the following part of this article content.

How to fill up the brake fluid of a Genesis G80

So now we will learn to you how to do the brake fluid level on a Genesis G80. Please notice that this is very basic to complete. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this info in the user manual of your Genesis G80. Now here are the steps to adhere to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once located, read the instructions on the cap attentively so as not to make any mistakes during the operation, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Genesis G80 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Genesis G80, make sure check the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely fill the brake fluid level of your Genesis G80.

If you want more tutorials on the Genesis G80, go to our Genesis G80 category.