Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Ford Ranger is one of the great classics. Even though this process is elementary to perform, some of you are most likely trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Ford Ranger? We will now answer these questions.
Advantage to always have the brake fluid level up in your Ford Ranger
So we begin our guideline with the interest of looking at the brake fluid level on a Ford Ranger. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is as a result necessary to verify the brake fluid level of your Ford Ranger frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because as time passes the brake fluid loses its features. This procedure is particularly simple and does not require evolved knowledge of mechanics, so it is easy for all Ford Ranger owners to do it themselves. If the Brake light on the dashboard of your Ford Ranger does not match to a lack of brake fluid, do not think twice to browse our guideline for details. On the other hand, there are some measures and rules to follow that we will see in the up coming part of this guideline.
How to fill up the brake fluid of a Ford Ranger
So now we will explain to you how to do the brake fluid level on a Ford Ranger. Please be aware that this is very elementary to do. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this information in the user manual of your Ford Ranger. Now here are the steps to stick to to make your level:
- Open your hood and locate your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
- Once discovered, read the instructions on the cap mindfully so as not to make any mistakes within the the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Ford Ranger up to the mark “Max”.
- If the level was beneath the “Min” mark before you checked the brake fluid level in your Ford Ranger, make sure verify the level in a few days/weeks to make sure you don’t have a leak in the brake system
.
That’s it, you now have all the information you need to safely fill the brake fluid level of your Ford Ranger.
To get more tips on the Ford Ranger, take a look at the Ford Ranger category.
