Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Ford Expedition is one of the great classics. Even though this act is elementary to perform, some of you are most likely wondering why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Ford Expedition? We will now answer these questions.
Benefit to always have the brake fluid level up in your Ford Expedition
So we begin our content with the significance of looking at the brake fluid level on a Ford Expedition. This fluid has a vital role on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that with time you may lose brake fluid in the normal way (without any leakage). It is therefore necessary to check the brake fluid level of your Ford Expedition on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its attributes. This procedure is specially simple and does not require advanced knowledge of mechanics, so it is easy for all Ford Expedition owners to do it on their own. If the Brake light on the dashboard of your Ford Expedition does not correspond to a lack of brake fluid, do not think twice to browse our content for details. However, there are some safety measures and rules to follow that we will check out in the following section of this content.
How to fill up the brake fluid of a Ford Expedition
So now we will explain to you how to do the brake fluid level on a Ford Expedition. Please take note that this is very basic to complete. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this information in the user manual of your Ford Expedition. Now here are the steps to adhere to to make your level:
- Open your bonnet and situate your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
- Once discovered, read the instructions on the cap mindfully so as not to make any problems during the procedure, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ford Expedition up to the mark “Max”.
- If the level was below the “Min” mark before you checked the brake fluid level in your Ford Expedition, make sure you check the level in a few days/weeks to be certain you don’t have a leak in the brake system
.
That’s it, you now have all the information you need to securely fill the brake fluid level of your Ford Expedition.
If you need more tutorials on the Ford Expedition, go to our Ford Expedition category.
